Xerox 7700 用户手册

Insert the PhaserMatch or PhaserCal CD-ROM into your computer's CD-ROM drive.

The CD-ROM automatically runs the installer.

Read the license agreement and click Accept to continue.

To install additional profiles, select Custom, and then select the profiles that you 

want to install.

Follow the prompts in the installer to finish the installation.

■

For an introduction to using PhaserMatch or PhaserCal to calibrate your Phaser 7760, 
7750, or 7700 printer, go to 

■

For an introduction to creating a custom TekColor correction, go to 

■

For an introduction to printing using custom TekColor corrections, go to 

Color calibration is one of the most important things you can do if you want to obtain optimal 
color output from your printer. Color laser printers must be periodically calibrated to eliminate 
changes in printed colors caused by environmental conditions, such as temperature and 
humidity, and normal wear on printer consumables, such as toner cartridges and imaging units. 
Calibration may also be necessary if the printer has been used for long extended print runs or 
after extended periods of inactivity.

Calibration can be done using one of the following two methods. 

■

Method 1 is a spectrophotometer-based calibration done within PhaserMatch/PhaserCal 
software.

This is the recommended method for calibration as it provides the most consistent 
calibration method for your printer. If you do not have a spectrophotometer, it is suggested 
that you consider purchasing one because a spectrophotometer can be a valuable color tool 
for your business.

■

Method 2 is a visual calibration done using the control panel of the printer.

Calibration should be performed after the printer is warmed up.

For more information on color calibration, see