Xerox 750P 安装指导

Supported DHCP fields

The printer recognizes the DHCP fields listed in the following table.      

Setting the IP address:  PhaserLink Printer 
Management Software

After setting the printer’s IP address by another method, you can perform the rest of the 
TCP/IP configuration using PhaserLink Printer Management Software, if you have a World 
Wide Web browser.  For more information on PhaserLink Printer Management Software, 
see PhaserLink Printer Management Software on page 33.

On the left side of any PhaserLink page, click Settings. 

In the INTERFACES group, click TCP/IP. 

Enter your printer’s settings and click Apply at the bottom of the page. 

The printer responds by displaying a dialog box that allows you to reset the printer.  
The changes will not take effect until the printer is reset.

gw

Gateway address list

List of IP addresses separated by spaces.

ha

Hardware address

Hexadecimal;  the ha tag must be preceded by the ht 
tag.

ht

Hardware type (see 
Assigned Numbers RFC)

Unsigned decimal, octal, or hexadecimal integer, or one 
of the following symbolic names:

ethernet or ether for 10-Mbit Ethernet (DIX 
encapsulation);
ieee802 for IEEE 802 Ethernet (SNAP encapsulation).

ip

IP address

Single IP address.

lg

Log host address(es)

List of IP addresses separated by spaces.

sm

Subnet mask

Single IP address.

dn

IP domain name

Single domain name.

ds

DNS server IP address

Printer recognizes up to two IP addresses, separated by 
spaces.