Xerox 750P 用户指南

A list of solutions for solving TCP/IP problems dealing with pinging another 
computer and timeout issues appears. Most common TCP/IP problems can be 
resolved in the article Verifying TCP/IP communications by pinging.

■

If the communication link between your computer and the printer is 
working, the printer ejects a blank page. If this occurs, but you cannot 
print from your application or through Windows, make sure that the 
appropriate driver is installed and that you have selected the printer 
correctly.

■

Make sure that the printer is turned on and the cables are correctly attached. 

■

Check the termination (refer to the documentation for your network adapter or 
connector for information on termination).

■

If you have changed the printer’s name, make sure that you have given it a unique 
name (not the same as any other printer in the zone or on the network).

■

Make sure that the correct network is selected in either the Network or AppleTalk 
Control Panel.

If the printer does not appear in the Macintosh chooser, refer to the TekSMART knowledge 
base for solutions: www2.tek.com/TekSMART/

In the Go to a specific document number field, enter the number 2889 and click Go.

A list of solutions for connecting The Printer does not Appear in the Chooser's Select 
a PostScript Printer Window Macintosh appears.

If you need assistance with connection methods, refer again to the TekSMART 
knowledge base. In the Go to a specific document number field, enter 2562 and click 
Go.

A list of solutions is shown for Connecting a Tektronix Phaser Printer to a Macintosh 
Directly via Ethernet.