Xerox 6280 用户手册

To set up and configure over the network:

1. Connect the printer to the network using the recommended hardware and cables.

2. Turn on the printer and the computer.

3. Print the Configuration page and keep it for referencing network settings.

4. Set the printer’s IP address. To do this, see 

5. Install the driver software on the computer from the Software and Documentation 

. For information on driver installation, see the section in this chapter for the 

specific operating system you are using.

6. Print a Configuration page to verify the new settings.

If the Software and Documentation CD-ROM is not available, you can download the 

latest driver from