Xerox 740 用户指南

PhaserLink Printer Management Software provides email notification, allowing the 
printer to automatically send email to the system administrator and others when the 
printer needs attention (for example, paper jams or out of ink).  This email 
notification capability is supplied by an SMTP client embedded in the printer’s 
firmware.  For more information, see “PhaserLink Status Notification (Email 
Notification)” on page 132.

The Syslog facility provides a dynamic path for printer status information that 
allows administrators to collect information from the printer.  You can set a priority 
threshold indicating which messages from the printer will be sent to the listed log 
host.

The threshold is a number listed in the following table.  The priorities listed in the 
table conform to BSD and SunOS conventions.         

If you are using BOOTP to set the printer’s network address, the printer sends 
syslog messages to the hosts listed in the BOOTP log hosts field.  If you are not 
using BOOTP or have not specified a log host in the BOOTP configuration, you 
must set the syslog host address as described in the next two topics.

There are two ways to set Syslog priorities:

■

With a TCP/IP connection and a World Wide Web browser, you can use 
PhaserLink Printer Management Software.  See the next topic, “Setting 
Syslog priorities using PhaserLink Printer Management Software” for more 
information. 

■

Send the appropriate PostScript file to the printer.  See “Setting Syslog 
priorities using a PostScript utility file” on page 80.

Emergency

0

Printer is no longer available

Alert

1

Printer needs immediate attention

Critical

2

Critical error message

Error

3

Error message

Warning

4

Warning message

Notice (printer’s default)

5

Normal but significant message

Information

6

Informational message

Debugging

7

Debugging message