Xerox 740 安装指导
8
Setting the Printer’s IP Addressing Parameters
52
PhaserShare Networking
Obtain the information listed in the following table. It might be helpful to write
down this information so you can refer to it during the configuration procedure.
down this information so you can refer to it during the configuration procedure.
General information: setting IP parameters
from the front panel
from the front panel
You can set IP address, network mask, gateway address, and broadcast address
from the front panel. For procedures, see the following topics:
from the front panel. For procedures, see the following topics:
■
■
■
Information for TCP/IP configuration
Information
Comments
Internet (IP) address for
the printer
the printer
Format is x.x.x.x, where x represents a decimal number
from 0 - 255.
from 0 - 255.
Network mask
If you are unsure, leave this blank; the printer will choose
an appropriate mask.
an appropriate mask.
Broadcast address
If you are unsure, leave this blank; the printer computes
an appropriate broadcast address.
an appropriate broadcast address.
The address the printer uses to send broadcast packets.
Regardless of how this parameter is set, the printer
accepts broadcast packets from any of the commonly
used broadcast address conventions.
Regardless of how this parameter is set, the printer
accepts broadcast packets from any of the commonly
used broadcast address conventions.
Gateway IP address
Router address. You need this address if you want to
communicate with the printer from anywhere other than
the local network segment.
communicate with the printer from anywhere other than
the local network segment.