Xerox 750 用户指南

Printing a color sampler chart from the Phaser 750 
printer’s front panel

Use the same color correction and print quality mode to print the chart and to 
print from your application. Any other color correction or print quality mode 
selections in the driver will cause colors to print differently than expected.

Selecting a color correction and a print quality mode

At the Ready message in the printer’s front panel, press Menu.

At the Menu Maps message, scroll to Print Quality, press Menu.

Scroll to Print Quality Modes, press Menu.

To change the selected print quality mode:

Scroll to More Choices, press OK.

Scroll to the selection you want, press OK. The display returns to the Print 
Quality Modes level. 

Scroll to TekColor Correction, press Menu.

To change the selected color correction:

Scroll to More Choices, press OK.

Scroll to the selection you want, press OK. The display returns to the TekColor 
Correction level. 

Press 

 until the front panel reads Ready.

Printing a color sampler chart

At the Ready message in the printer’s front panel, press Menu.

At the Menu Maps message, scroll to Printer Demo, press Menu.

Scroll to RGB Sampler Prints or CMYK Sampler Prints, press Print.

For future reference, write the name of the color correction that you used on the first 
page of the chart.

Printing the desired colors from an application

Using the color sampler chart that you printed earlier, select the desired colors.

From your application, apply the desired colors in your document by entering the 
specific CMYK or RGB values as indicated on the sampler chart.

Print your document; select the same color correction and print quality mode that you 
used to print the color sampler chart.