Xerox 750 用户指南

Print quality hints

To ensure the best print quality and the most reliable printer operation, follow these 
simple guidelines:

■

Use high-quality paper and only Tektronix transparencies and glossy coated paper.

■

Do not use any media designed for inkjet printers, especially inkjet coated paper and 
inkjet transparencies. Inkjet media are coated with a substance that may damage the 
Fuser; Tektronix does not furnish warranty service for damage or malfunction caused 
by the use of non-Tektronix supplies or consumables. Tektronix coated paper and 
transparencies have been specially designed for use with Tektronix Color Laser 
Printers.

■

Double-sided printing and specialty media will require more frequent cleaning of the 
rollers and will reduce the average life of the consumables.

■

Auto-duplex only with laser bond paper that is 75 - 90 g/m

2

 (20 - 24 lb.). Do not use 

paper that is lighter than 75 g/m

2

 (20 lb.); it is not opaque enough for acceptable 

duplex prints.

■

Use only laser paper for automatic double-sided printing with the Duplex Unit. 

■

Keep the Imaging Unit’s light exposure to a minimum — less than 90 seconds of 
artificial light and no exposure to sunlight — or you may damage the unit: 

■

When installing a new Imaging Unit, keep the protective plastic sheet on until 
immediately before inserting the unit. 

■

If, when installing the Imaging Unit, you also need to install other components, 
install the Imaging Unit last to minimize its light exposure.

■

When changing a Toner Cartridge or clearing a media jam, make sure that you 
close the printer’s right side door quickly to avoid any light exposure to the 
Imaging Unit.

■

Do not leave the printer’s front door open for extended periods of time (for 
example, several hours).

■

Do not touch the underside or the right side of the Imaging Unit; fingerprints may 
appear on your output.