Xerox 750 用户指南

下载
页码 183
Advanced Features and Troubleshooting Manual
169
Material Safety Data Sheets for Phaser 750 Printers
MSDS for Toner 
SECTION 1- PRODUCT IDENTIFICATION
Trade Names                                       Tektronix Part Number
Black Toner Cartridge                         016-1803-00, 016-1807-00
Cyan Toner Cartridge                          016-1800-00, 016-1804-00
Magenta Toner Cartridge                     016-1801-00, 016-1805-00
Yellow Toner Cartridge                       016-1802-00, 016-1806-00
Product Use: Tektronix Phaser 750 printer.
SECTION 2 - INFORMATION ON INGREDIENTS
Ingredients: Toners are a proprietary blend of resins and pigments, encased in a cartridge. 
SECTION 3 - HAZARDS IDENTIFICATION
ROUTES OF EXPOSURE: Toner powders are encased in a cartridge. Minimal exposure through 
inhalation or skin contact is expected when used as intended.
POTENTIAL HEALTH EFFECTS: Health effects from this product are expected to be negligible, 
when product is used as intended.
Immediate Effects:
Inhalation:
 Minimum irritation to respiratory tract, as for any non-toxic dust. 
Skin: Expected to be low hazard to skin, when used as intended.
Eye: May cause mild irritation.
Ingestion: Not an expected route of exposure.
Chronic Effects: None known or expected.
SIGNS AND SYMPTOMS OF EXPOSURE: Minor irritation to respiratory tract, skin, and eyes.
MEDICAL CONDITIONS AGGRAVATED BY EXPOSURE: None known.
SECTION 4 - FIRST AID MEASURES
INHALATION: Unlikely route of exposure. In the event of exposure, remove person to fresh air. 
Seek medical attention if symptoms occur.
EYES: If particles get into eye, flush thoroughly with water. Seek medical attention if symptoms 
occur. 
SKIN: Wash thoroughly with water. Seek medical attention if symptoms of irritation occur.
INGESTION: Seek medical attention immediately.
SECTION 5 - FIRE FIGHTING MEASURES
FLASH POINT: Not applicable.
FIRE & EXPLOSION HAZARDS: These toners will burn. Like most organic powders, explosive 
mixtures can form when powder is dispersed in air.
EXTINGUISHING MEDIA: Use CO2, dry chemical, foam, or water.
FIRE FIGHTING INSTRUCTIONS: Avoid inhalation of smoke. As for any fire, wear protective 
clothing and self-contained breathing apparatus. 
SECTION 6 - ACCIDENTAL RELEASE MEASURES
SPILL OR LEAK: Toners are encased in a cartridge. However, in case of breakage, toner powders 
may be cleaned up with a broom or vacuum. Sweep slowly to minimize dust generation. If a vacuum 
is used, the motor must be dust tight. Clean up residue if necessary with soap and water. Wash or 
dry clean garments after removing loose toner.
SECTION 7 - HANDLING AND STORAGE
HANDLING: No special precautions
STORAGE: Avoid high temperatures.