Xerox 790DP 用户指南

Windows NT 4.0 print drivers

3.  Network Setup

Xerox Phaser 790 Getting Started

3-9

1. 

Ensure that the Printer is prepared for network printing.

2. 

Ensure that you have the Printer name, Apple Talk Zone (if applicable),
and IP Address. These may be obtained from your system administrator
or from the Configuration Page.
In order to print the Configuration Page, perform the following steps:

a. 

Press the Offline button on the Printer Control Panel

b. 

Press the Menu button repeatedly until the message Print Pages
from List is displayed on the Control Panel Screen

c. 

Pressthe Item/Enter button in order to select Print Configuration
Page.

d. 

Pressthe Item/Enter again button in order to print the page.

The following procedure provides the steps for installing the printer driver for
parallel port printing. For detailed information about setting up IPX, TCP/IP, or
SMB printing, refer to Installing the user software in a Windows NT 4.0
environment.

1. 

Insert the User Software CD in your CD-ROM drive.

2. 

Select Start, Settings, and Printers.

3. 

Double-click Add Printer and select Next.

4. 

Select My Computer and Next.

5. 

Select LPT1 and Next.

6. 

Select Have Disk.

7. 

Perform one of the following:

•

 

If you are installing from the CD, type the name of the CD-ROM

drive (for example, D:\) and select Browse.

•

 

If you are installing from files you downloaded using the Installer

WebTool, type the name of your hard disk drive (for example, C:\)
and select Browse.