Xerox 7760dn 用户指南

If your printer has a finisher, you can have the printer staple sets of up to 50 sheets of 75 g/m

2

 

(20  lb. Bond Paper). 

If your printer has a finisher with the booklet maker, you can have the printer saddle staple and 
fold sets of up to 15 sheets to make a booklet. It can also fold sets of up to 5 sheets without 
stapling. 

Use the following guidelines when stapling paper:

■

To be stapled, the sheets of paper must have a width between 203–297 mm (8–11.7 in.) 
and height between 182–432 mm (7.2–17 in.).

■

Extra Thick Card Stock, glossy paper, transparencies, labels, and envelopes are not 
stapled.

■

To use the booklet maker, the paper size must be Letter (short-edge feed), US Folio, Legal, 
Tabloid, A4 (short-edge feed), A3, or B4 JIS.

The following stapling options are available from the printer driver:

■

None (default): The prints are not stapled.

■

Front: Inserts one staple in each set of copies. (For portrait long-edge feed paper, 
staples the upper-left corner.)

■

Rear: Inserts one staple in each set of copies. (For portrait long-edge feed paper, 
staples the lower-left corner.)

■

Dual: Inserts two staples in each set of copies. (For portrait long-edge feed paper, 
staples the left edge.)

■

Quadruple: Inserts four staples in each set of copies. (For portrait long-edge feed 
paper, staples the left edge.)

■

Saddle: Inserts two staples on the center line of each set of copies. Each set is then 
folded along the center line and sent to the lower tray of the finisher.

■

Fold (No Staple): Each set of copies is folded along the center line and sent to the 
lower tray of the finisher.

Advanced Features Guide at 

The sample image in the printer driver displays the location of the staples, which changes 
depending on the orientation of the page and the paper feed direction (long-edge feed or 
short-edge feed).