Xerox 850 安装指导
2
Phaser 850 Color Printer
Network Printing with Tektronix Color Printers
The printer’s Configuration Page
The information supplied on the Configuration Page is helpful when you are installing
and configuring the printer on a network. There are two ways to print the Configuration
Page:
and configuring the printer on a network. There are two ways to print the Configuration
Page:
■
Use the printer’s front panel.
Use this method if your printer is not yet configured on
the network. Refer to
■
Use PhaserLink Printer Management Software.
With a TCP/IP connection and a
World Wide Web browser, you can use PhaserLink Printer Management Software; see
Printing a Configuration Page from the Phaser 850 front panel
1.
When the front panel displays
READY TO PRINT,
press the up-arrow button until
Menu
is highlighted. Press
Select.
2.
Press the down-arrow button until
Printer Configuration
is highlighted. Press
Select.
3.
Press the down-arrow button until
Print Configuration Page
is highlighted. Press
Select.
4.
To return the printer to normal operation, press the down-arrow button until
Exit
is
highlighted. Press
Select.
Printing a Configuration Page: PhaserLink Printer Management
Software
Software
1.
Connect to the printer via PhaserLink (see
2.
On the left side of any PhaserLink page, click
Settings.
3.
In the
REPORTS
group, click
Print Configuration Page.
The printer’s networking software
The printer’s software CD-ROM contains software for installing your printer on a network.
The CD-ROM also contains online documentation, printer drivers, and other printer
software. A single integrated installer is used to install printer drivers and other software.
For information on running the installer, see
The CD-ROM also contains online documentation, printer drivers, and other printer
software. A single integrated installer is used to install printer drivers and other software.
For information on running the installer, see