Xerox 860 用户手册
32
Phaser 860 Color Printer
Network Protocols
Disabling and Enabling Protocols Using the Front
Panel
1.
With
Menus
highlighted, press the OK key.
2.
Scroll to
Network Setup Menu
by pressing the Scroll Up or Scroll Down key.
3.
Press the OK key.
4.
Scroll to
DHCP/BOOTP, TCP/IP, EtherTalk, NetWare,
or
IPP
.
5.
Press the OK key.
6.
Scroll to display either
On
or
Off
.
7.
Press the OK key.
8.
To exit the menu system, scroll to
Exit
and press the OK key.
Disabling Protocols Using CentreWare IS
1.
Connect to the printer via CentreWare IS (see page 23).
2.
On the main CentreWare IS page, click Properties.
3.
On the left side of the page, in the Protocols group, select the protocol to be disabled.
This displays the page for that protocol.
This displays the page for that protocol.
4.
On the page are fields labeled with the settings for the protocol. To disable a setting or
protocol, select Off
protocol, select Off
5.
Click Save Changes at the bottom of the page.