Xerox 8825 用户手册

8.  Unlatch (A) and open (B) the Cutter Drawer.

9.  Locate and remove any media from the Cutter area.

10.  Close the Cutter Drawer.

11.  The printer will resume printing when all jam locations have been cleared.

If the problem continues, call for service.

CHECK FOLDER

FOLDER
COMMUNICATIONS
ERROR #17

Finisher Config Type
enabled but no folder is
installed.

1. Press 

the

ONLINE/OFFLINE
button to take the
printer OFFLINE.

2.  Refer to Finisher

Settings on page
27 and reset the
value to NONE

F2-01 CHECK
FOLDER

FOLDER
COMMUNICATIONS
ERROR #01

Finisher Config Type
enabled but no folder is
installed.

1.  Switch OFF the
     Printer.

2.  Wait 5 seconds and
     switch ON the
     printer

3.   As soon as the
     Printer Firmware
     Version message is
     displayed, press the
     ONLINE/OFFLINE
     button to take the
     printer OFFLINE.

4.  Refer to Finisher
     Settings on page
     27 and reset the
     value to NONE