Xerox 242 补充手册

Setting Up and Configuring the Spire CX260

167

Set 

Mail Service options to receive and send scanned jobs directly to one or more 

e-mail addresses.

1.

In the Settings window, select 

Mail Service.

2.

In the 

Outgoing mail server box, type your outgoing mail server. Usually, you 

can obtain this from your site administrator or IT department.

3.

In the 

Attachment max size list, select the maximum size for scanned jobs that 

will be attached to an e-mail message.

4. In the 

Administrator E-mail address box, type the e-mail address that will 

receive any returned e-mail messages.

5.

Under 

Authentication level, select either Anonymous or Basic. If you select 

Basic, you will need to enter a user ID and password.

Localization

Set the locally-used unit measurements and language in the 

Localization parameter.

1.

In the Settings window, select 

Localization.

2.

In the 

Units area, select Millimeters or Inches, as desired.

Important:  To make sure your outgoing mail service is enabled on the Spire 
CX260, verify that the anti-virus software rules allow for mailing. For example, 
in Mcafee VirusScan Console, under 

Access Protection Properties, on the 

Port Blocking tab, clear the Prevent mass mailing worms from sending 
mail check box and click OK.

Note:  The maximum size for an e-mail attachment is 10 MB.