Xerox 242 补充手册

Working Remotely

39

1.

On your client workstation, select 

Start > Programs > Creo > Remote Scan 

Application > Remote Scan.

The Remote Scan Application window appears.

2.

When you connect the first time, or to connect to a different Spire CX260, 
enter the server hostname or IP address in the 

Server Name or IP list, and click 

Connect.

The remote scan application is connected to the Spire CX260 and you are ready 
to begin working. By default, the last scan box you used is displayed.

The remote scan application enables you to:

•

Create scan boxes either locally or from your client workstation, and then set 
parameters that specify the location of your scanned data, the format in which it 
is saved, and security settings

•

Manage scanned images

The Spire CX260 has three default scan boxes:

•

SpireBW200_1S—Jobs scanned to this box have the following settings: 
OutputColor=Black and white, ScanResolution=200dpi, 2SidedOriginal=1 side

•

SpireGrayScale200_1S—Jobs scanned to this box have the following settings: 
OutputColor=Greyscale, ScanResolution=200dpi, 2SidedOriginal=1 side

•

SpireColor200_1S—Jobs scanned to this box have the following settings: 
OutputColor=Color, ScanResolution=200dpi, 2SidedOriginal=1 side

If you scan a job using one of the default scan boxes, the job is saved to the scan box, 
and to 

D:\PublicScans on the Spire CX260.

1.

In the remote scan application, click 

ScanBox Manager.

Note:  By default, the Remote Scan application remembers your last 
connection.

Note:  There is a fourth default scan box for calibration.

Note:  The remote scan application must be connected to the server.