Xerox 6121MFP 用户指南
Faxing
Phaser 6121MFP Multifunction Printer
User Guide
User Guide
126
Setting Up Distinctive Ringtone Pattern Detection
If you have one line that serves as both a fax and phone line, you can configure the printer to
distinguish an incoming fax from an incoming phone call based on the ringtone pattern. When an
incoming fax is detected, the printer will process it as a fax.
distinguish an incoming fax from an incoming phone call based on the ringtone pattern. When an
incoming fax is detected, the printer will process it as a fax.
Note:
There are four pre-assigned ringtone patterns for fax. Which one you use depends on your
location and PBX (private branch exchange) provider. If you do not know which ringtone to use,
contact your PBX provider to determine which pattern is used for fax numbers.
contact your PBX provider to determine which pattern is used for fax numbers.
To set up Distinctive Rrington Pattern Detection:
1. On the printer control panel, press the Fax button.
2. Press the Down Arrow button to go to Fax Default Setup and then press the OK button.
3. Arrow down to Receive Option and press OK.
4. Arrow down to Receive Mode and press OK.
5. Arrow down to Distinctive Ring and press OK.
6. Select the ringtone type as specified by your PBX provider:
1. On the printer control panel, press the Fax button.
2. Press the Down Arrow button to go to Fax Default Setup and then press the OK button.
3. Arrow down to Receive Option and press OK.
4. Arrow down to Receive Mode and press OK.
5. Arrow down to Distinctive Ring and press OK.
6. Select the ringtone type as specified by your PBX provider:
7. Press OK.
Ring
Ring Pattern
Long-long
Short-long-short
Short-short-long
Very long (normal pattern)
6121-207
6121-208
6121-209
6121-210