Xerox 6121MFP 用户指南
Maintenance
Phaser 6121MFP Multifunction Printer
User Guide
163
Cleaning the Interior
This section includes:
•
•
•
•
•
•
After clearing paper jams or replacing the imaging unit, inspect the inside of the printer before closing
the printer covers.
the printer covers.
Warning:
Never touch a labeled area found on or near the heat roller in the fuser when hot. You
can get burned. If a sheet of paper is wrapped around the heat roller, do not try to remove it until
the printer has cooled down sufficiently. To avoid injury, switch off the printer and wait 20 minutes
for the fuser to cool.
the printer has cooled down sufficiently. To avoid injury, switch off the printer and wait 20 minutes
for the fuser to cool.
•
Remove any remaining pieces of paper.
•
Remove any dust or stains with a clean, dry cloth.
Cleaning the Media Rollers
The accumulation of paper dust and other debris on the media rollers can cause paper-feeding
problems.
problems.
To clean the media rollers:
1. If there is paper in the output tray (Tray 1), remove it, remove the dust cover and then fold up the
1. If there is paper in the output tray (Tray 1), remove it, remove the dust cover and then fold up the
output tray before opening the printer top.
6121-184
6121-211