Xerox 6121MFP 用户指南
Maintenance
Phaser 6121MFP Multifunction Printer
User Guide
User Guide
174
Calibrating the Printer
Calibration performs three primary adjustments:
•
•
Color registration
•
Toner density
•
Toner reproduction curve (used for converting screen colors to CMYK values)
For optimum print quality, the printer automatically performs a calibration cycle after the following
events:
•
events:
•
A toner cartridge has been replaced.
•
The imaging unit has been replaced.
•
200 pages have printed since the last calibration.
•
A big temperature or humidity change has occurred.
•
The printer is restarted after settings have been changed.
Normally you would not need to perform a calibration routine unless you are having problems with
printing colors.
printing colors.
To perform a manual calibration cycle:
1. On the printer control panel, press the Back/Menu button to enter the System Menu.
2. Press the Down Arrow button to go to General Setup and then press the OK button.
3. Arrow down to Calibrate Now? and press OK.
4. Arrow up to Yes and press OK. The printer performs a calibration cycle, which takes about 2
1. On the printer control panel, press the Back/Menu button to enter the System Menu.
2. Press the Down Arrow button to go to General Setup and then press the OK button.
3. Arrow down to Calibrate Now? and press OK.
4. Arrow up to Yes and press OK. The printer performs a calibration cycle, which takes about 2
minutes.