Xerox 3100MFP 用户手册

- 42 -

Run the application by clicking on the X

 C

 icon located on your desktop or from the menu 

 3100 MFP  > C

.

From this screen you can monitor the information or 
configure your machine from the tabs:

• D

: Displays the list of devices 

managed by the PC.

• C

: Presents the machine screen (USB 

connection only).

• C

: Displays the consumables status.

This tab shows the list of devices managed by the PC.

Only one device at a time may be connected to the PC. 
The current device may be selected by clicking on the 
radio button corresponding to the device.

The status of the connection between the current device 
and the PC is indicated by a colour. The following table 
defines the possible states of the connection.

1 Select a device by clicking on its line in the list and 

click on P

 to configure the scanning 

parameters to be applied for this device when you 
use the S

 function.

2 Select the desired scan M

 in the drop-down 

menu.

Colour

State

Yellow

Connection in progress.

Green

Connection established.

Red

The PC cannot connect to the device.
Check the USB connection.