Xerox 6110MFP 用户手册
Using SetIP
10
2
Using SetIP
Installing SetIP
1
Make sure that the printer is connected to your computer
and powered on.
and powered on.
2
Insert the supplied CD-ROM into your CD-ROM drive.
The CD-ROM should automatically run, and an installation
window appears.
If the installation window does not appear, click Start and
then Run. Type X:\Setup.exe, replacing “X” with the
letter which represents your drive and click OK.
The CD-ROM should automatically run, and an installation
window appears.
If the installation window does not appear, click Start and
then Run. Type X:\Setup.exe, replacing “X” with the
letter which represents your drive and click OK.
3
Click Install SetIP Utility(Optional).
4
Click Next.
5
Click Next.
6
Click Finish.
Using SetIP
1
From the Windows Start menu, select Programs or All
Programs Æ Xerox Phaser 6110MFP Æ SetIP Æ
SetIP.
Programs Æ Xerox Phaser 6110MFP Æ SetIP Æ
SetIP.
The program automatically detects and displays new
and configured print servers on your network.
2
Select the name of your printer and click
. If you
cannot find your printer name, click
to refresh
the list.
N
OTES
:
•
To confirm the MAC address, see the NETWORK PRINTER
CARD TEST PAGE. The NETWORK PRINTER CARD TEST
PAGE will be printed after the Configuration Page.
• The refreshed list doesn’t show your printer, click
enter
your network printer card’s IP address, subnet mask, default
gateway, and then click Apply.
3
Click OK to confirm the settings.
4
Click Exit to close the SetIP program.