Xerox 6115MFP 用户指南
Scan to Email (Network Only)
Phaser® 6115MFP Multifunction Product
8-7
Scan to Email Using the Document Glass
To scan documents to email using the document glass:
■
For information on changing the image size, see
1.
Press the Scan button to enter scan mode.
2.
Lift the ADF cover and place the document facedown on the document glass as shown
below.
below.
3.
Gently close the ADF cover.
4.
5.
Enter a subject line using the alphanumeric keypad, and then press the
Menu/Select button.
Menu/Select button.
6.
Enter any additional CC email addresses, and then press the Menu/Select button.
7.
Use the Left Arrow or Right Arrow buttons select
Color
,
Gray
, or
B&W
as the color
mode, and then press the Menu/Select button.
8.
Continue setting the desired scan mode settings.
■
For information on specifying detailed settings, such as data format or compression
encoding, and scan resolution, see
encoding, and scan resolution, see
■
For information on changing the image size, see
■
9.
Using the Left Arrow or Right Arrow button, select
BOOK
and then press the
Menu/Select button to start scanning.
10.
When scanning a document containing several pages, place the next page on the document
glass when the message
glass when the message
NEXT PAGE?
appears on the control panel, and then press the
Menu/Select button.
11.
Repeat Step 10 until all pages of the document have been scanned.
12.
Press the Start button to send the transmission.
6115-074
6115-075