Xerox 6115MFP 用户指南

Your product and supplies were designed and tested to meet strict safety requirements. These 
include safety agency examination, approval, and compliance with established environmental 
standards.

Your attention to the following safety guidelines helps to ensure the continued, safe operation 
of your product.

■

Place the product in a dust-free area within a temperature range of 50° F to 90° F (10° C to 
32° C) and a relative humidity range of 15 percent to 80 percent.

■

Place the product in an area where there is adequate space for ventilation, operation, and 
servicing. 

■

Do not place the product on a carpeted location such as a carpeted floor. Airborne carpet 
fibers can be pulled into the product and cause print- and copy-quality problems.

■

Do not place the product near a heat source.

■

Do not place the product in direct sunlight to avoid exposure to light-sensitive 
components.

■

Do not place the product where it is directly exposed to the cold air flow from an air 
conditioning product.

■

Do not block or cover the slots and opening on the product. The product may overheat 
without adequate ventilation.

■

Place the product on a level, solid non-vibrating surface with adequate strength to hold the 
weight of the product. The base product weight without any packaging materials is 
approximately 33 kg (72.8 lb.).

■

Keep hands, hair, neckties, etc., away from the exit and feed rollers.

■

Do not remove the paper source tray that you selected in either the printer driver or control 
panel.

■

Do not open the doors when the product is printing.

■

Do not move the product when it is printing.