Xerox 6115MFP 用户指南

This section includes:

■

■

■

■

■

■

To avoid damage, always remove misfed media gently, without tearing it. Any piece of media 
left in the product, whether large or small, can obstruct the media path and cause further 
misfeeds. Do not reload media that has misfed.

The image is not fixed on the media before the fusing process. If you touch the printed 

surface, the toner may stick to your hands, so be careful not to touch the printed face when 
removing the misfed media. Make sure not to spill any toner inside the product.

Unfused toner can dirty your hands, clothes, or anything else it gets on. If you 

accidentally get toner on your clothes, lightly dust them off as best as you can. If some toner 
remains on your clothes, use cool, not hot water, to rinse the toner off. If toner gets on your 
skin, wash it off with cool water and a mild soap.

If you get toner in your eyes, wash it out immediately with cool water and consult a 

doctor. If, after clearing the media misfeed, the misfeed message in the control panel window 
persists, open and close the product’s top cover. This should clear the misfeed message.

If, after clearing the paper jam, the message is still displayed on the front panel, open 

and close the top cover. This should clear the paper jam message.

Remove any media and close the output bin. 

6115-103

6115-087