Xerox 6115MFP 用户指南
Configuring the Product
Phaser® 6115MFP Multifunction Product
3-6
Setting the Auto Panel Reset
Auto panel reset returns the control panel to its default settings after the product has been idle
for the specified a specified amount of time.
for the specified a specified amount of time.
Using the Control Panel
1.
From the main screen, press the Menu/Select button to enter the
Machine Setup
menu.
2.
Scroll to the
Auto Panel Reset
menu, or press number 1 on the alphanumeric keypad, and
then press the Menu/Select button.
3.
Use the Right Arrow or Left Arrow button to select ON or OFF, and then press the
Menu/Select button.
Menu/Select button.
OFF
: The control panel auto reset operation is not performed.
ON
: The control panel will be reset to its default values at the intervals selected by the
user.
4.
If you select
ON
, select from
0.5, 1, 2, 3, 4, 5
minutes for the product to be idle before the
control panel is reset to its default values, and then press the Menu/Select button to save
the settings.
the settings.
Using CentreWare IS
1.
Launch your web browser.
2.
Enter the product’s IP address in the browser’s Address field (http://xxx.xxx.xxx.xxx).
3.
Click the Login button and log in as an administrator.
4.
Under Administration, click the Reset button.
5.
Select Reset All Factory Settings, and then click Save Changes.
Using the MFP ControlCentre
1.
Open the MCC, connect to your product and download the current .dat file.
2.
Click the Menu button.
3.
Select the Machine Setup tab.
4.
Select the desired amount of time from the Auto Panel Reset drop-down list, and then
click OK.
click OK.
5.
Click the Upload button to save the new settings to the product.