Xerox 6115MFP 用户指南

The Phaser 6115MFP supports the following network protocols:

■

BOOTP/DHCP

■

HTTP

■

IPP

■

LPD/LPR

■

SLP

■

SNMP

■

Port 9100

■

SMTP

BOOTP (Bootstrap Protocol) is an Internet protocol that enables a diskless workstation to 
discover (1) its own IP address, (2) the IP address of a BOOTP server on the network, and (3) 
a file that can be loaded into memory to boot the workstation. This enables the workstation to 
boot without requiring a hard or floppy disk drive. 

DHCP (Dynamic Host Configuration Protocol) is a protocol for assigning dynamic IP 
addresses to devices on a network. With dynamic addressing, a device can have a different IP 
address every time it connects to the network. In some products, the device’s IP address can 
even change while it is still connected. DHCP also supports a mix of static and dynamic IP 
addresses. Dynamic addressing simplifies network administration because the software keeps 
track of IP addresses rather than requiring an administrator to manage the task. This means 
that a new computer can be added to a network without the hassle of manually assigning it a 
unique IP address. 

HTTP (HyperText Transfer Protocol) is the underlying protocol used by the World Wide Web. 
It defines how messages are formatted and transmitted, and what actions web servers and 
browsers should take in response to various commands. For example, when you enter a URL 
in your browser, this actually sends an HTTP command to the web server directing it to fetch 
and transmit the requested web page. 

IPP (Internet Printing Protocol) is a protocol for end users’ most common printing situations 
over the Internet. It allows users to find out about a printer’s capabilities, submit print jobs to a 
printer, determine the status of the printer or print job, and cancel a previously submitted print 
job.