Xerox 6115MFP 用户指南
Loading Media
Phaser® 6115MFP Multifunction Product
6-5
Loading Media
This section includes:
■
■
■
■
■
■
■
■
■
Holding a stack of approximately 200 sheets at a time, fan the stack to prevent static buildup
before inserting it in a tray.
before inserting it in a tray.
Note:
Do not fan transparencies.
Other Media
When loading media other than plain paper, set the media mode (for example, Envelope,
Glossy, Label, Thick Card Stock, or Transparency) in the printer driver for optimum print
quality.
Glossy, Label, Thick Card Stock, or Transparency) in the printer driver for optimum print
quality.
Caution:
Although this printer was designed for printing on a wide range of media types, it is
not intended to print exclusively on a single media type except plain paper. Continuous
printing on media other than plain paper (such as envelopes, labels, thick stock, or
transparencies) may adversely affect print quality or reduce engine life.
printing on media other than plain paper (such as envelopes, labels, thick stock, or
transparencies) may adversely affect print quality or reduce engine life.
When refilling media, first remove any media remaining in the tray. Stack it with the new
media, even the edges, and then reload it. Do not mix media of different types and sizes, as this
will cause media misfeeds.
media, even the edges, and then reload it. Do not mix media of different types and sizes, as this
will cause media misfeeds.