Xerox 6115MFP 用户指南
Loading Media
Phaser® 6115MFP Multifunction Product
6-11
Loading Envelopes
Print on the front (address) side only. Some parts of the envelope consist of three layers of
paper: the front, back, and flap. Anything printed on these layered regions may be lost or
faded.
paper: the front, back, and flap. Anything printed on these layered regions may be lost or
faded.
Caution:
Envelopes require you to adjust the product’s fuser. Follow the instructions for
loading envelopes to avoid damaging the product.
Use envelopes that are:
■
Common office envelopes with diagonal joints, sharp folds and edges, and ordinary
gummed flaps
gummed flaps
■
Approved for laser printing
■
Dry
Caution:
Because the envelopes pass through heated rollers, the gummed area on the flaps
may seal. Using envelopes with emulsion-based glue avoids this problem.
Do not use envelopes that have:
■
Sticky flaps
■
Tape seals, metal clasps, paper clips, fasteners, or peel-off strips for sealing
■
Transparent windows
■
Too rough of a surface
■
Material that will melt, vaporize, offset, discolor, or emit dangerous fumes
■
Been presealed
Capacity
Tray 1
Up to 10 envelopes, depending on their thickness.
Tray 2
Not supported; Do not use in Tray 2.
Orientation
Faceup
Driver media type
Envelope
Weight
Base material up to 90 g/m
2
(24 lb. Bond)
2-sided printing
Not supported