Xerox 3200 用户手册
2 Getting Started
2-4
Xerox Phaser 3200MFP
Installing the Print Cartridge
1.
Open the front door.
2.
Remove the Print Cartridge
from its bag and remove the paper
protecting the cartridge by pulling the
packing tape.
from its bag and remove the paper
protecting the cartridge by pulling the
packing tape.
3.
Thoroughly rock the cartridge 5 or 6
times to distribute the toner. This will
loosen the toner and make sure that
you get the maximum copies from the
cartridge.
times to distribute the toner. This will
loosen the toner and make sure that
you get the maximum copies from the
cartridge.
NOTE:
If toner gets on your clothing, wipe it
off with a dry cloth and wash clothing in cold
water. Hot water sets toner into fabric.
water. Hot water sets toner into fabric.
CAUTION:
To prevent damage, do not expose the Print Cartridge to
light for more than a few minutes. Cover it with a piece of paper if left
exposed for more than a few minutes.
exposed for more than a few minutes.
CAUTION:
Do not touch the green underside of the Print Cartridge. Use
the handle on the cartridge when lifting the cartridge to avoid touching
this area.
this area.