Xerox 6180MFP 用户指南

Depending on your particular setup, the following hardware and cabling is required for 
Ethernet.

■

If you are connecting to one computer, an Ethernet RJ-45 crossover cable is required. 

■

If you are connecting to one or more computers with an Ethernet hub, or cable or DSL 
router, two or more twisted-pair (category 5/RJ-45) cables are required. (One cable for 
each device.)

If you are connecting to one or more computers with a hub, connect the computer to the hub 
with one cable, and then connect the printer to the hub with the second cable. Connect to any 
port on the hub except the uplink port.

 

If you are connecting to one computer, a USB connection offers fast data speeds. A USB 
connection is not as fast as an Ethernet connection but is faster than using parallel. To use 
USB, PC users must have Windows 2000, Windows XP, Windows Server 2003, or newer 
operating system. Macintosh users must use Mac OS X, version 10.2 and higher.

A USB connection requires a standard A/B USB cable. This cable is not included with your 
printer and must be purchased separately. Verify that you are using the correct USB cable for 
your connection (2.0 for best results).

Connect one end of the USB cable to the printer and turn it on.

Connect the other end of the USB cable to the computer.