Xerox 8560MFP 用户指南
Solving Print-Quality Problems
Phaser® 8560MFP/8860MFP Multifunction Printer
7-7
Smudges or Smears
Problem
Smudges or smears appear on the page.
Solution
To prevent smudges or smears from appearing on the page:
1.
Verify that the paper you are using is the correct type for the system and is properly loaded
in the tray. For information on support paper types and weights, print the Paper Tips page.
in the tray. For information on support paper types and weights, print the Paper Tips page.
a.
On the control panel, press the System button.
b.
Select
Information
, and then press the OK button.
c.
Select
Information Pages
, and then press the OK button.
d.
Select
Paper Tips Page
, and then press the OK button.
2.
If the problem continues, run cleaning pages through the system:
a.
On the control panel, press the System button.
b.
Select
Troubleshooting
, and then press the OK button.
c.
Select
Print Quality Problems
, and then press the OK button.
d.
Select
Remove Print Smears
, and then press the OK button. The system cleans the
ink from the rollers by running several sheets of paper through the system. Repeat
Step 2 up to three times if the smears continue to appear.
Step 2 up to three times if the smears continue to appear.
3.
If the problem continues:
a.
Open the door on the side of the system and remove the maintenance kit.
b.
Wipe the plastic wiper blade with a lint-free cloth.
c.
Replace the maintenance kit and close the door.
Note:
Smudges or smears may appear if you print on side two of pre-printed paper, but do not
select 2nds Side as the paper type. Select the
2nd Side
option on the control panel and in the
printer driver.
See also: