Xerox 123 用户指南
Scan to Mailbox Setup
Xerox CopyCentre/WorkCentre/WorkCentre Pro 123/128/133 System Administration Guide
125
Scan to FTP/SMB
You can send the scanned documents through a TCP/IP network to a computer
(server) such as an FTP or SMB server.
(server) such as an FTP or SMB server.
Scan to Mailbox Setup
Information Checklist
Before enabling the feature, make sure that the following items are available or have
been performed. If Kerberos has been enabled, refer to Remote Authentication Setup
(If Required) on page 131.
been performed. If Kerberos has been enabled, refer to Remote Authentication Setup
(If Required) on page 131.
scan
Computer
Network
Item
By
An existing operational network utilizing TCP/IP is required. These
procedures are not designed to install a network.
procedures are not designed to install a network.
Customer
Obtain and record the following information:
• IP address
• Gateway address
• Subnet mask
• Host name
Refer to the Glossary for additional information about the Gateway Address
and Subnet mask.
• IP address
• Gateway address
• Subnet mask
• Host name
Refer to the Glossary for additional information about the Gateway Address
and Subnet mask.
Customer
Test the machine to make sure that it is installed fully and functioning
correctly.
correctly.
Customer
Mailboxes need to be created on the touch screen of the machine or via
CentreWare Internet Services.
CentreWare Internet Services.
Customer
Install the scan driver.
Customer