Xerox 123 用户指南

If problems are encountered during machine setup, refer to the Problem Solving 
chapter of the User Guide.

The machine and the computer must be connected to a network and be able to 
communicate using TCP/IP protocol.

To send the scanned document to a server using a template, configure the following 
settings on the machine:

Network Communication Setup
By using the touch screen, activate the Internet Services (HTTP), FTP Client, or SMB 
port to [Enabled].
Then, set the IP address.

Workstation Setup
This requires the workstation in the networking environment to be configured to 
communicate with the machine.

NOTE: CentreWare Internet Services can also be used to configure the machine. 
Refer to the CentreWare Internet Services chapter of the User Guide.

NOTE: Keep the SNMP port enabled while you use the machine on the TCP/IP 
network.

Initially, activate the port.

Connect the machine to the network.

Display the [System Settings] screen.

NOTE: For more information about how to display the [System Settings] screen, refer 
to the Setups chapter of the User Guide.

Select [Network Settings].

Select [Port Settings]. 

Kerberos Server IP or Name if Remote Authentication is required, likewise 
DNS Server Address or Domain Name if Kerberos Server Name is used.

Customer