Xerox 4150 用户指南

This section provides instructions on how to install and configure optional features:
• Network Scanning
• Hard Disk Overwrite
• Server Fax
• Network Accounting

All the Option Kits are installed in the same way. Each kit will contain a Feature Enablement 
Key and instructions.

With the WorkCentre switched on, insert 
the Feature Enablement Key into the Card 
Reader slot just above the On/Off switch on 
the left hand side of the machine.

When the feature is successfully installed a 
pop-up message will tell you that the 
feature is configured and ask you to 
remove the Feature Enablement Key.

Network Scanning is an optional feature, available for the WorkCentre 4150s, 4150x and 
4150xf, and can be purchased from your Xerox Sales Representative. 
Network Scanning enables you to convert your hard copy documents to electronic files and 
retrieve them from a server or workstation on the network.
There are two ways to configure Network Scanning:

• Use Internet Services, the WorkCentre's embedded web server, to set up the 

Network Scanning feature. Installation and setup of this feature is described below.

• FreeFlow™ SMARTsend™ is an optional application that will scan to a variety of 

destinations. Installation and setup of this feature is described in the FreeFlow™ 
SMARTsend™ System Administrators CD that comes with the application.

At your PC, open your web browser and enter the Host Name or IP address of the 
WorkCentre.

Select Properties > Services > Network Scanning > File Repository Setup.