Xerox 7132 用户指南

下载
页码 184
Scan to Mailbox Setup 
Xerox WorkCentre 7132 System Administration Guide
129
Scan to Mailbox
 
Setup
This feature allows documents to be stored in a mailbox (public or private) for future 
processing.
Prerequisites for Scan to Mailbox Setup
Confirm that an existing operational network utilizing TCP/IP is available.
Target Computers
• Windows 95 (Service Pack 1 or later)/Windows 98/Windows Me
• Windows NT 4.0 (Service Pack 4 or later)/Windows 2000/Windows XP/
Windows Server 2003
Procedure for Scan to Mailbox Setup through CentreWare Internet 
Services
1.
From a workstation, open up a web browser (such as Internet Explorer), and then 
enter the device’s IP address in the format "http://xxx.xxx.xxx.xxx" (the xxx’s 
represent the device’s IP address). If connected properly, you should see a 
CentreWare Internet Services web page for your machine.
2.
Create mailboxes:
1) Click the [Properties] tab.
2) Click the [Mailboxes] folder.
3) Click the [Edit] button.
4) Enter the appropriate information.
5) Click on [Apply].
NOTE: A password will be required when accessing a mailbox, if mailboxes are 
password-protected on creation.
3.
From the touch screen, select [Scan to Mailbox].
Data to Set Up Scan to 
Mailbox
Install 
Requirement
Comments
Mailboxes are created on 
the machine
Required
For additional information, refer to the User Guide.
Scan Driver is installed
Optional
This utility can be installed via the CD-ROM to 
view/print scanned documents.
CentreWare Internet 
Services
Optional
CentreWare Internet Services can be used to 
create/edit/view/print scanned documents from the 
mailboxes.