Xerox 7132 用户指南

This section explains the troubleshooting procedures and restrictions while using 
TCP/IP.

This section explains what to do when a problem occurs while using TCP/IP. The 
possible causes, confirmation methods, and actions are as follows.

The machine is connected to 
a network that is not available 
to your computer.

Check whether a router or 
gateway is between the 
network connected to your 
computer and one connected 
to the machine.

Directly connect the machine 
to the network connected to 
your computer.

A fault occurred on the 
network between your 
computer and the machine; 
connection failed.

Check that printer disabled 
status (network error) is 
displayed.

Check the network fault.

An invalid IP address is 
specified for the machine.

Print disabled status 
(Network Error) is displayed. 
Select [Properties] from the 
[Printer] menu on the printer 
window, and also select [Port 
Settings] on the [Details] tab. 
Compare the IP addresses in 
the [FX TCP/IP DPU Port 
Setups] and the System 
Settings List.

Enter the correct IP address 
in the IP address item of the 
[FX TCP/IP DPU Port Setup] 
dialog box.

After a print request was sent 
from the computer, the 
machine was switched off, or 
a print request was sent to a 
machine that was not 
switched on.

Print disabled status 
(Network Error) is displayed. 
Check whether the machine 
is switched on.

Switch the machine on.

Print requests are sent from 
multiple computers to the 
machine at the same time.

Print disabled status 
(Network Error) is displayed.

None. Printing restarts 
automatically.