Xerox 7132 用户指南

NOTE: Use CentreWare Internet Services to register the IP addresses which are not 
allowed to access the machine. Refer to the CentreWare Internet Services chapter of 
the User Guide.

When you have finished establishing TCP/IP, select [Close] from the [Protocol 
Settings] screen.

This section explains how to change the workstation OS for Solaris, SunOS, and HP-
UX workstations. Refer to the relevant instructions below.
Solaris – page 77
SunOS – page 78
HP-UX – page 79

A printer name for the logical printer should correspond to the print language/mode to 
be used for printing, or to the Logical Printer Number which was registered through 
CentreWare Internet Services. 

*: Requires PostScript Option Kit
You can also add output parameters to the above printer name. The parameters are 
the same as those for -C option. Insert “_” between the printer name and output 
parameter, for example “PS_A4”.
NOTE: If specifying a different printer name, the print language or mode specified on 
the touch screen of the machine is used.

PS*

PostScript

PSASC/PSA*

PostScript

PSBIN/PSB*

PostScript

PCL

PCL

LP

Print language specified on the touch screen of the machine.

DUMP/DMP

Dump mode

AUTO/ATO

Auto detection mode

TIFF/TIF

TIFF direct print

TIFF%n

TIFF (%n: Logical Printer Number 1 to 10 which were 
registered through CentreWare Internet Services.)

PS%n*

PostScript (%n: Logical Printer Number 1 to 10 which were 
registered through CentreWare Internet Services.)