Xerox 490cx 用户指南
3
SEARCH
SAFETY NOTES
This product is equipped with a grounding type plug. The plug will fit only
into a grounded power outlet. This is a safety feature. To avoid risk of
electric shock, contact your electrician to replace the receptacle if you are
unable to insert the plug into the outlet. Never use an adapter to connect the
WorkCentre to a power source receptacle that lacks a ground connection
terminal.
into a grounded power outlet. This is a safety feature. To avoid risk of
electric shock, contact your electrician to replace the receptacle if you are
unable to insert the plug into the outlet. Never use an adapter to connect the
WorkCentre to a power source receptacle that lacks a ground connection
terminal.
The WorkCentre 490cx should be operated from the type of power source
indicated on the label. If you are not sure of the type of power available,
consult your local power company.
indicated on the label. If you are not sure of the type of power available,
consult your local power company.
Do not allow anything to rest on the power cord. Do not locate the
WorkCentre 490cx where people will step on the cord.
WorkCentre 490cx where people will step on the cord.
The power supply cord is the disconnect device for this equipment. Ensure
that the WorkCentre 490cx is installed near an outlet and is easily
accessible.
that the WorkCentre 490cx is installed near an outlet and is easily
accessible.
Your machine is equipped with an energy saving device to conserve power
when the machine is not in use. The machine may be left on continuously.
when the machine is not in use. The machine may be left on continuously.
Slots and openings in the cabinet and in the back and sides of the
WorkCentre are provided for ventilation. To ensure reliable operation of the
WorkCentre and to protect it from overheating, these openings must not be
blocked or covered. The WorkCentre 490cx should never be located near or
over a radiator or heat register. The WorkCentre 490cx should not be placed
in a built-in installation unless proper ventilation is provided.
WorkCentre are provided for ventilation. To ensure reliable operation of the
WorkCentre and to protect it from overheating, these openings must not be
blocked or covered. The WorkCentre 490cx should never be located near or
over a radiator or heat register. The WorkCentre 490cx should not be placed
in a built-in installation unless proper ventilation is provided.
Never push objects of any kind into the slots of the WorkCentre 490cx as
they may touch dangerous voltage points or short out parts which could
result in a fire or electric shock.
they may touch dangerous voltage points or short out parts which could
result in a fire or electric shock.
Never spill liquid of any kind on the WorkCentre 490cx.