Xerox 490cx 用户指南
44
SEARCH
SYSTEM SETUP
Arrange Alignment
The Arrange Alignment menu settings provide an easy way to check and
adjust Ink Cartridge print head alignment. To run the Arrange Alignment:
adjust Ink Cartridge print head alignment. To run the Arrange Alignment:
1. Press the Menu
button, then press the 1 + 2 buttons on the keypad.
Then press the Start
button. The display indicates SELF TEST ?.
2. Press the Down
button. ARRANGE ALIGNMENT ? appears in the
display.
3. Press the Start
button. PRINTING... appears on the LCD display.
The WorkCentre 490cx prints out a Cartridge Alignment pattern sheet
consisting of a series of six test patterns. The patterns are designated
A,B,C, D, E and F. Each pattern is made up of a series of lines which are
individually numbered. By selecting the straightest line from each
pattern, you can optimize the print head alignment.
consisting of a series of six test patterns. The patterns are designated
A,B,C, D, E and F. Each pattern is made up of a series of lines which are
individually numbered. By selecting the straightest line from each
pattern, you can optimize the print head alignment.
After printing out the Cartridge Alignment sheet, the Cartridge
Maintenance set up menu appears on the LCD display.
Maintenance set up menu appears on the LCD display.
The letter A, located on the right end of the lower line in the display,
corresponds to alignment test pattern A. The range of numbers
bracketed in the center of the display line indicates the range of valid
pattern selection choices. The flashing number on the left side of the
display indicates the line from print pattern A that is currently selected as
optimal.
corresponds to alignment test pattern A. The range of numbers
bracketed in the center of the display line indicates the range of valid
pattern selection choices. The flashing number on the left side of the
display indicates the line from print pattern A that is currently selected as
optimal.
CARTRIDGE MAINT.
<15> [0-30] A