Xerox 490cx 用户指南
49
SEARCH
SYSTEM SETUP
4. Press the Start
button when the date and time settings displayed are
correct. The display indicates the date and time you have set, then
returns to Standby mode.
returns to Standby mode.
Note: If an invalid number is entered, the machine beeps and does not
proceed to the next step. If this happens, enter the correct number.
proceed to the next step. If this happens, enter the correct number.
Setting the System ID (Your Number and Name)
In some countries you are required by law to indicate your fax number on any
fax you send.
fax you send.
The System ID, containing your telephone number and name,
will be printed at the top of each page sent from your machine.
1. Press the Menu
button, then press the 0 + 2 buttons on the keypad.
Then press the Start
button. SYSTEM NUMBER appears in the LCD
display. A flashing cursor in the display prompts you to enter the
telephone number.
telephone number.
Note: If there is a number previously registered, it appears in the display.
2. Enter the telephone number (up to 20 digits) to which your machine is
connected. You can enter a space by pressing the Right
button two
times.
If an incorrect number is entered, press the Left
or Right
button
to move the cursor under the incorrect digit, then enter the correct
number.
number.
3. Press the Start
button when the correct number is displayed. The
display prompts you to enter your ID name.