Xerox 7228 用户指南
113
Enabling the E-mail Ports and Setting TCP/IP
First enable the E-mail ports, then set the IP address.
Note: The configuration can also be performed using CentreWare Internet Services.
For information on how to use CentreWare Internet Services, refer to the Internet Services section of
this guide.
this guide.
1. Display the System Administrator Menu screen.
a. Press
the
Log In/Out
button.
b. Enter the user ID with the numeric keypad or a keyboard displayed by pressing Keyboard, and
select Confirm.
Note: The default user ID is “11111”. When using the Authentication feature, a password is required.
The default password is “x-admin”.
The default password is “x-admin”.
c. Select
System Settings
.
2. Enable a port which is used for the E-mail feature.
a. Select
System Settings
.
b. Select
Network Settings
.
c. Select
Port Settings
.
d. On the Port Settings screen, select Send E-mail and then select Change Settings.
e. On the Send E-mail screen, select Port Status and select Change Settings.
f. On the Send E-mail Port Status screen, select Enabled then select Save.
g. Select
Close
.
h. On the Port Settings screen, select Receive E-mail, then select Change Settings.
i. On the Receive E-mail screen, select Port Status, then Change Settings.
j. On the Receive E-mail Port Status screen, select Enabled, then select Save and Close.
k. On the Port Settings screen, select Mail Notice Service, then select Change Settings.
l. On the Mail Notice Service screen, select Port Status, then Change Settings.
m. On the Mail Notice Service – Port Status screen, select Enabled, then Save.
n. Select
Close
repeatedly until the Network Settings screen is displayed.