Xerox 7228 用户指南

16 

To use the Web Service button on the machine (if available), which enables the machine to access HTTP 
file servers on the Internet, you need to enter your Proxy Server information as described here. 

1.  Open your Web browser and enter the TCP/IP address of the Device in the Address or Location field.  

Press Enter. 

2. Click 

the 

 Tab. 

3. Select 

 in the list of hot links. 

4.  Place a checkmark in the Use Proxy Server checkbox. 

5. From 

the 

 drop-down menu, select either Same Proxy for All Protocols, or Different 

Proxy for each Protocol, depending upon your Proxy Server setup. 

6. In 

the 

 box, enter in up to 1024 characters of IP addresses, fully 

qualified host names, or wildcard host names (such as *.eng), separated by semicolons.  Functioning 
like the local address exception list in a typical web browser, these addresses will be permitted to 
bypass the Proxy Server. 

7. For 

the 

, provide a name of up to 255 characters in length for one or 

both of these Proxy Servers.  A fully qualified domain name or IP address can be used.  Note:  Make 
sure that DNS is enabled as stated in the TCP/IP Protocol Configuration topic in the NOS Selection 
section of this guide. 

8. Leave 

the 

 set to 8080 (the IANA recognized proxy port) unless you are using a different 

port number.  If you are using a different port number, enter it in the available box. 

9. Check 

the 

 box if client authentication is required for the Proxy Server. 

10. Enter the Login Name for access to the proxy server.  Up to 32 characters can be entered. 

11. Enter the Password for access to the proxy server.  Up to 32 characters can be entered. 

12. Click Apply. 

13.  Enter the System Administrator user ID and password when prompted and click OK.