Xerox 7228 用户指南

199 

Configuring Remote authentication 

When Remote Access is enabled, users of the device will be asked to provide a user name and password 
to be validated by the designated authentication server.  If this validation is successful, the machine and 
any restricted services will be available for individual use. 

1.  Ensure the machine is fully functional on the network. 

2.  Ensure that the TCP/IP, with DNS/WINS enabled, and HTTP protocols are configured on the device 

and fully functional.  Refer to those topics in this guide for configuring information as required.  This is 
required to access CentreWare Internet Services to configure Authentication. The Internet Services 
function is accessed through the embedded HTTP server on the machine and allows System 
Administrators to configure Authentication settings by using an Internet browser. 

3.  Ensure the Authentication Server to be used is functional on your network.   Refer to your 

manufacturer’s documentation for instructions to complete this task. 

1.  Open your Web browser and enter the TCP/IP address of the machine in the Address or Location 

field. Press Enter. 

2. Click 

the 

 tab. 

3. Select 

 in the list of hot links. 

4. Select 

 from the Auditron Mode drop-down list. 

5.  Place a checkmark in the Enable box for each service that you wish to restrict access to.  For 

explanations of each service, click the Help button. 

6. Click 

 and enter the Administrator User name and password when prompted. 

7. Select 

the 

 folder in the list of hot links. 

8. Select 

, then select your system from the drop-down list and click Apply.