Xerox 7228 用户指南

252 

Configure NetWare Settings   

N5.2

 

1.  Open your Web browser and enter the TCP/IP address of the Device in the Address or Location field.  

Press Enter. 

2. Click 

the 

tab. 

3.  Click the plus symbol (+) to the left of the Protocol Settings file folder. 

4. Select 

 in the directory tree.  Note:  If NetWare is not displayed, click on Port Status to see if 

the NetWare Port is checked (enabled). 

5.  The available selections include: 

•  A Host Name (Print Server) Text box.   Use this name to create the Print Server (in Bindery) and 

Print Server object (in NDS). 

•  An Active Mode selection box for Directory (NDS) or Bindery. 
•  A (Primary) File Server Name entry box (Bindery). 
•  A Polling Interval entry box for Queue Polling Interval (1 - 1000 seconds). 
•  A Number of Searches entry box for SAP frequency (1 - 100 seconds, with the ability to set to 

zero, which is off). 

•  Two Password text boxes for logging into the NetWare Server. 
•  A TBCP Filter checkbox (displayed when PostScript is enabled). 
•  Under the NDS Subject Label there is a text box for Tree, followed by one for Context. 
•  A Frame Selection box, with a default of Auto (auto sensing).  Other selections include Ethernet II 

(used when running TCP/IP on your network), Ethernet 802.3 (used for NetWare versions up to 
3.11), Ethernet 802.2 (the default for NetWare 3.12 and later), and Ethernet SNAP (used on 
networks running TCP/IP and/or AppleTalk). 

•  A display of the Device's Network (MAC) address. 
•  A Service Location Protocol (SLP) Active Search Enablement box.  For use with NetWare 5 and 

newer versions, this protocol helps to reduce service advertising network traffic.