Xerox 7228 用户指南

42 

7. Press 

the 

 to access the Port Settings menu. 

8.  When the Port Settings menu displays, press the SMB selection line. 

9. Press 

the 

 in the lower right corner of the Port Settings menu screen. 

10.  When the SMB selection menu displays, note that you have only one setting available on a single, 

numbered horizontal line.  Press this selection line. 

11. Press the Change Settings button. 

12.  On the SMB Port Status screen, note which of the two buttons is highlighted as the current setting for 

SMB Enablement.  The available settings are Enabled or Disabled.  To enable SMB at the device, 
select the Enabled setting. 

13. Click the Save button on the touch screen, which returns you to the SMB selection menu.  (To exit 

the screen, without making changes, click the Cancel button.) 

14.  Exit the SMB selection menu and return to the Port Settings menu by pressing the rectangular Close 

button in the upper right corner of the touch screen. 

15.  Exit the Port Settings menu by pressing the rectangular Close button in the upper right corner of the 

Port Settings menu screen. 

16.  Exit the Network Settings screen by pressing the rectangular Close button in the upper right corner of 

the screen. 

17.  Exit the System Settings screen by pressing the rectangular Close button in the upper right corner of 

the screen. 

18.  Finally, press the rectangular Exit button in the upper right corner of the System Settings screen to 

have the device reboot and enable your SMB setting.