Xerox 7228 用户指南

Scanning to the Device’s Hard Drive

Before You Start

It is assumed that you purchased the Scanning option

to enable Scanning to the Hard Drive with your

Device. If you did not, contact your Xerox Representative to purchase this option.

To support retrieval of scanned documents from the Device's "Mailboxes" to your workstation's desktop,
make sure that the protocol known as "Salutation" is enabled

, either from the Device's Control Panel

or through the use of Internet Services.

Print a Settings List to verify that Salutation is enabled

1. Press

the

Machine Status button

2. Press

the

Billing Meter/Print Report Tab

on the touch screen.

3. Press

the

Print Report/List button

4. Press

the

Copy Mode Settings button

5. Press

the

Settings List button

displayed by itself on screen.

6. Press the large, green, Start button, located to the immediate right of the Control Panel’s numeric

keypad.

7. The printing process will be graphically displayed on the touch screen. Upon receipt of the Settings

List, note that the three page print is formatted into two columns with horizontal ruled lines indicating
four distinct data display areas on the print. The first area displays System Settings. The second
area

displays Copy Mode Settings. The third area displays Print Mode Settings. The fourth area

displays Communication Settings. THIS IS THE AREA THAT SHOULD SHOW SALUTATION AS
ENABLED.