Xerox 7132 安装指南
Scan to Email
Copyright © 2006, Xerox Corporation. All rights reserved.
2
Prerequisites for Scan to Email Setup
Confirm that:
1.
An existing operational network using TCP/IP is available.
2.
The device must be setup with DNS and the Domain Name settings for the network.
have been correctly setup for the multifunction device.
have been correctly setup for the multifunction device.
* Only if the SMTP server requires login and password for authentication.
Procedure for Scan to Email Setup
1.
2.
Press
Login/Logout
, then type the UserID 11111 and press Confirm.
3.
From the System Administrator menu, select System Settings.
4.
Select System Settings.
5.
Select Network Settings.
6.
Select Port Settings.
7.
Enable the Receive E-Mail port and Send E-Mail port by highlighting each port and
selecting Change Settings.
selecting Change Settings.
8.
Select Close several times then Exit. The device will reboot.
9.
From a workstation, open up a web browser (such as Internet Explorer), and then enter
the IP address in the format http://xxx.xxx.xxx.xxx (the xxx's represent the device IP
address). If connected properly, you should see a CentreWare Internet Services web
page for your device.
the IP address in the format http://xxx.xxx.xxx.xxx (the xxx's represent the device IP
address). If connected properly, you should see a CentreWare Internet Services web
page for your device.
Data to Setup Email
Install Requirement
Comments
SMTP mail server Host
Name or IP address
Name or IP address
Required
If using an external mail
server, your Internet Service
Provider will provide you
with the mail server name or
IP address.
server, your Internet Service
Provider will provide you
with the mail server name or
IP address.
SMTP login/password
Required*
WorkCentre Email address
Required
This email address will fill in
the "From" field on the
emails sent from the device.
the "From" field on the
emails sent from the device.
Local email addresses
Optional
A Local Address Book can
be created to store email
addresses.
be created to store email
addresses.
LDAP server address can
be enabled
be enabled
LDAP Host Name
Displays only email
addresses on the corporate
(LDAP) internal address
book.
addresses on the corporate
(LDAP) internal address
book.