Xerox wc7530 用户指南
Maintenance
WorkCentre 7500 Series Multifunction Printer 183
User Guide
3. Remove any loose staples or other debris from inside the finisher.
4. Pinch both sides of the staple case (1) and remove the staple case from the cartridge (2).
4. Pinch both sides of the staple case (1) and remove the staple case from the cartridge (2).
1
1
2
5. Insert the front side of the new staple case into the staple cartridge (1), then push the rear side into
the cartridge (2).
1
2
6. Grip the staple cartridge by the orange handle and insert the cartridge into the stapler until it clicks.
7. Close the finisher front cover.
Replacing Staples in the Main Stapler of the Office Finisher LX
WARNING:
Do not perform this procedure while the printer is copying or printing.
1. Open the finisher door as shown.