Xerox wc7530 用户指南

下载
页码 280
Troubleshooting 
 
246 
WorkCentre 7500 Series Multifunction Printer 
 User 
Guide 
 
Server Fax is enabled. 
Make sure that Server Fax is disabled. 
If the problem persists, go to 
www.xerox.com/office/WC75xxsupport
 for online support information. 
 
 
Problems Receiving Faxes 
 
Symptoms 
Causes 
Solutions 
The received fax is blank. 
There is a problem with the telephone 
connection or with the fax machine of 
the caller. 
Verify that the printer can make clean 
copies. If it can, have the caller send the 
fax again. 
The sender loaded the pages 
incorrectly. 
Contact the sender. 
The printer answers the call, but 
does not accept incoming data. 
Not enough memory. 
If the job contains several graphics, the 
printer could not have enough memory. 
The printer does not answer when 
memory is low. Delete stored 
documents and jobs then wait for the 
existing job to complete. This increases 
available memory. 
The received fax size is reduced.  The paper supply in the printer does 
not match the document size sent. 
Confirm the original size of the 
documents. Documents could be 
reduced based on the available paper 
supply in the printer. 
Faxes cannot be received 
automatically. 
The printer is set to receive faxes 
manually. 
Set the printer to automatic reception. 
The memory is full. 
Load paper if it is empty, and then print 
the faxes stored in the memory. 
The telephone line is incorrectly 
connected. 
Verify the telephone line connection. If 
it is disconnected, connect it. 
There is a problem with the fax 
machine of the sender. 
Make a copy to verify that your printer 
is operating correctly. If the copy prints 
correctly, have the recipient verify their 
fax machine is operating correctly. 
If the problem persists, go to 
www.xerox.com/office/WC75xxsupport
 for online support information.