Xerox wc7530 用户指南
Paper and Media
46
WorkCentre 7500 Series Multifunction Printer
User
Guide
6. Close the tray. A message appears on the control panel.
7. Verify the size, type, and color of the paper. Change the selection for any incorrect setting.
8. On the printer touch screen, touch Confirm.
7. Verify the size, type, and color of the paper. Change the selection for any incorrect setting.
8. On the printer touch screen, touch Confirm.
Loading Paper in Trays 3 and 4 of the Tandem Tray Module
The Tandem Tray Module holds larger amounts of paper for fewer printing interruptions. It contains
three trays. Tray 2 holds paper sizes up to SRA3/12 x 18 in. Trays 3 and 4 hold A4/letter size paper only.
three trays. Tray 2 holds paper sizes up to SRA3/12 x 18 in. Trays 3 and 4 hold A4/letter size paper only.
Note:
Do not load custom size paper into Tray 3 or Tray 4 of the Tandem Tray Module.
To load tray 2, see
Loading Paper in Trays 1-4
on page 44.
1. Pull tray 3 or tray 4 out until it stops.
2. Fan the edges of the paper before loading it into the paper trays. This procedure separates any
2. Fan the edges of the paper before loading it into the paper trays. This procedure separates any
sheets of paper that are stuck together and reduces the possibility of paper jams.
Note:
To avoid paper jams and misfeeds, do not remove paper from its packaging until necessary.